Andrew 7.6-Meter ESA Manual de usuario descargar pdf (Pagina 18)

Step 3

Step 4

Attach 201316 support pairs to 221608 joint assemblies as shown in Figure 15.

• Place supports back-to-back with edges out and flat of angle inward

• Install 45967 spacer at midpoints of support pairs

• Use 7/8 x 2-1/4 in (57 mm) hardware for each connection

Installation Procedures

Figure 15

Attach 221345 azimuth pivot assembly to 201316 support pairs. Attach 201596 mount-

ing plates to 201458 azimuth pivot assembly tab as shown in Figure 16.

• Use 7/8 x 2-1/4 in (57 mm) hardware for each connection

• Insert bolts from rear of pivot assembly to connect supports

Figure 16

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 68 69

Sin comentarios

Andrew 7.6-Meter ESA Manual de usuario Pagina 18