Andrew ES45T Manual de usuario descargar pdf (Pagina 16)

Step 5

Step 6

Loosely attach support angles (P/N 49622) to the upper azimuth axis joint (P/N 300748)

and the connection plates (part of P/N 49635)as shown in Figure 8.

• Use A-325 ½ x 1-½ in. bolts, flatwashers and nuts. (see page 12)

•

Angles should be attached with flat of angle facing upward

• Loosely attach support angles to azimuth axis joint (P/N 49629)

Installation Procedures

Figure 8

Apply a liberal amount of grease (P/N 49208) to azimuth axis support (P/N 49634) and

corresponding underside of azimuth axis joint as shown in Figure 9.

Figure 9

300748

UPPER

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 80 81

Sin comentarios

Andrew ES45T Manual de usuario Pagina 16