Andrew ES45T Manual de usuario descargar pdf (Pagina 46)

ES45T-T-1

Reflector

Step 1

Step 2

Installation Procedures

The ES45T-T-1 reflector is composed of six precision-formed panels designed for accu-

rate strength, and ensures a reliable surface contour that provides exceptional operating

characteristics in C-, X- or Ku-frequency bands.

Reflector should be assembled on a clear, flat area in front of the foundation pad. Clear

debris from area and place plastic sheeting from packing crate as shown in Figure 56.

Arrange diameter setting band assembly (P/N 49612) and temporary supports as shown

in Figure 54.

• Tighten ¼-20 hardware at center connection until snug

• Reflector should be assembled in front of foundation pad with bottom of reflector 3 ft.

from pad

• Temporary supports should be 6-8 in. high

•

Tie three string levels to opposing blocks across diameter of circle

• Adjust supports with shims until strings are level and lightly touch at center of circle

•

Once supports are level, remove strings

• Move supports 12 in. radially away from circle, carefully maintaining orientation and

height for later reuse

Figure 54

ES45T-T Reflector Assembly

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 80 81

Sin comentarios

Andrew ES45T Manual de usuario Pagina 46