Andrew ATC200-Lite Guía para resolver problemas descargar pdf (Pagina 22)

Section 2– Teletilt

RET System Components in Detail Remote Electrical Downtilt System Handbook

2-8 May 2009 Bulletin 639519 • Revision D

Figure 2-14. ATC200-1000 Antenna System Controller.

2.9 Rack Mount Antenna System Controllers

Like the portable controllers, rack mount controllers serve as an interface between a PC/laptop and

the actuator/antenna system. Generally, the rack mount controller is installed to reside permanently

on-site. These controllers can be operated using a standard Internet browser to facilitate remote

access from the network operations center. Additionally, the antenna network management system

(ANMS™) can be used to remotely control whole clusters of sites. A rack mount controller must

have SNMP conﬁ guration for access to the operations center network. See Figures 2-14 and 2-15,

and Tables 2-4 and 2-5.

Ethernet

Port

Status

LED

LMT

Port

Female

AISG RET

Port

Figure 2-13. ATC200-LITE-USB Controller End Panels.

RS-232

Serial Port

dc IN Port

USB Port

Data LED ﬂ ashes green on transmitting and red on receiving signals

Power LED is lit when power is input

+12 and

+24 LEDs are lit to show voltage level output

AISG female port for

control cable from antenna

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 81 82

Sin comentarios

Andrew ATC200-Lite Guía para resolver problemas Pagina 22