Andrew ATC200-Lite Guía para resolver problemas descargar pdf (Pagina 68)

Section 15–IP Addressing Using Windows Vista Remote Electrical Downtilt System Handbook

15-4 May 2009 Bulletin 639519 • Revision D

Figure 15-9. Local Area Connection Properties.

Figure 15-10. Local Area Connection Status.

Most computers are setup to use DHCP with their Home/Work Networks. If this is the case, the 7.

Obtain an IP address automatically radio button will be selected. If you have a static IP

address, the Use the following IP address radio button will be used (Figure 15-7).

Ensure that you record your current settings, so when you have completed your work with the

ATC200/300-1000, you can reset your system for Home or Ofﬁ ce networking (Figure 15-7).

Select 8. Use the following IP address radio button (Figure 15-8).

Type the IP Address 192.168.255.140 and Subnet Mask 255.255.255.0 (Figure 15-8).9.

Select 10. OK.

Select 11. OK (Figure 15-9).

Select 12. Close (Figure 15-10). You can now close any additional windows.

Figure 15-8. Enter New IP address and

Subnet Mask.

Figure 15-7. Setting Needed to Restore the Computer

to its Original IP Identity.

Record the

computer’s

existing

setting.

Type the new

IP address

and Subnet

mask for your

ATC200/300-

1000 controller.

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 81 82

Sin comentarios

Andrew ATC200-Lite Guía para resolver problemas Pagina 68