Andrew ATC200-Lite Guía para resolver problemas descargar pdf (Pagina 72)

Section 17–Node B Controller Remote Electrical Downtilt System Handbook

17-1 May 2009 Bulletin 639519 • Revision D

Section 17

Node B Controller Notes

• For Nokia and Ericsson embedded controllers, actuators must have a ﬁ rmware version of 2.0.20

minimum or higher to operate correctly.

• If the Node B shuts down when trying to adjust an Andrew actuator:

1. Apply latest ﬁ rmware to the actuator using ATC200-LITE-USB:

• Complete procedure is detailed in the ATC200-LITE-USB User Guide, Bulletin # 639536.

See Section 3, Uploading Firmware.

• DOWNLOAD the latest antenna deﬁ nition ﬁ le and ATCLite/ATM200 software ﬁ les from the

Andrew→Products tab on www.commscope.com.

Click on Antennas→Base Station Antenna Systems→Teletilt RET System→Downloads

→Teletilt RET Products Software, Firmware, Tools, and Manuals.

2. Clear the alarm in the actuator using the ATC200-LITE-USB (either by clicking on the CLEAR

ALARM button or by a successful move).

• See Node-B controller documentation from the manufacturer for further analysis.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 81 82

Sin comentarios

Andrew ATC200-Lite Guía para resolver problemas Pagina 72