Andrew ATC200-Lite Guía para resolver problemas descargar pdf (Pagina 73)

Bulletin 639519 • Revision D May 2009 18-1

Section 18

Interoperability with Non-Andrew Devices

18.1 ATC200-LITE-USB

• ATC200-LITE-USB is not designed to work with actuators, etc. of other manufacturers. Functional-

ity would need to be veriﬁ ed through interoperability testing.

• ATC200-LITE-USB equipment can generally be used with software from other manufacturers.

(For example, use Cobra software and ATC200-LITE-USB on serial cable to control legacy EMS

products.)

18.2 ATC300-1000

• ATC300-1000 does not display height, location, technology, and antenna type for non-Andrew

actuators, because these parameters are Andrew speciﬁ c. TMAs also do not have these param-

eters.

18.3 Kathrein

• ATC200-LITE-USB can change tilt of Kathrein actuators if they have previously been conﬁ gured.

ATC200-LITE-USB cannot conﬁ gure Kathrein actuators.

• Both ATC200-1000 and ATC300-1000 can be used with a special conﬁ guration ﬁ le to conﬁ gure

Kathrein actuators. Contact Andrew Customer Support.

18.4 Using ATC200-1000 to Control Powerwave Antennas

• The antenna deﬁ nition ﬁ le is RET_LA_AT_xxx.ascu. ‘xxx’ is the version number.

• Available from Andrew Technical Support.

To get the antenna deﬁ nition ﬁ le, call Andrew Technical Support (1-800-255-1479, Option 1).

• System build for ATC200-1000 has to be 454A5 or later (found by going to controller menu bar

Help→About).

• When conﬁ guring a Powerwave antenna, highlight the antenna on the home page.

Click on Edit Selected.

Choose antenna model.

Click on Calibrate. (Calibration has to be done frequently, for example, when you change

the sector ID for the antenna.)

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 81 82

Sin comentarios

Andrew ATC200-Lite Guía para resolver problemas Pagina 73